How to remove the cracks in the wood

How to remove the cracks in the wood

We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

How to remove the cracks in the wood: a guide forfill the longitudinal crackswhich are formed in thewood. Remedies for cracks and cracks in the wood.

After having seen "how to glue wood", we continue to talk about the typical problems we may encounter in the home: the cracks and fissures that form in the wood.

Why do cracks form in wood?

More than narrow cracks, sometimes they look like real cracks. In reality, these are cracks that form on wooden panels or beams of solid wood (solid wood, noble wood) or laminated wood, due to thermal changes or excessive heating. These cracks in the wood are generally longitudinal or in any case follow the grain of the wood. They can be more or less deep, more or less wide or long ... In any case, the intervention of repairconsists infill the crackswith a putty or, even better, with resins.

Wide cracks in the wood

When it comes to cracksvery wide orlarge cracks in the wood, the best solution is to take a thin strip and push it into thecrackuntil it is filled, then level and paint the surface. When the crack is very large and deep, in fact, putty and resins may not be enough. In case of large cracks, take a wooden strip that you have soaked with vinyl glue, push it into the crack and then shape until the thickness is perfectly leveled. The inserted strip must be of the same essence as the wood you intend to repair.

How to remove the cracks in the wood

When it comes tocracksof a few millimeters, you just need someputty for woodor sealant resins with a liquid consistency.

Wood putty is effective and acts as asealantperforming a filling and gluing action. On the market there are different types of putty for wood, choose one that is treatable just like wood.

On the market it is easy to find putty or liquid resins for wood. You can go to any DIY store or take advantage of online shopping. On "this Amazon page", for example, you can find an excellent wood filler proposed at a price of 12.08 euros with free shipping costs. How to use? It depends on how wide the crack is: in the case of very wide cracks, after application it is necessary to put the surface under pressure, perhaps in a vice, so as to make the putty act as an adhesive and not just as a filler. If the top is not put under pressure, the grout will only perform a filling action.

How to fill the cracks in the wood

If you are very practical, do it with the cue, otherwise, wear gloves and handle the putty with your hands (yes, with your hands!).

Spread some dough (wood putty) near the crack and with your fingers, press until it is full. In larger cracks, however, it is better to use the spatula so as to exert the right pressure first following an angle of inclination and then the opposite one (so as to be sure to completely fill the crack in the wood).

Before the grout hardens, remove the superfluous one with a slightly damp sponge. Wait for the time to allow the wood filler to solidify completely. With sandpaper, sand so as to perfectly level the surface. If you have spread the grout with your fingers, you will only need a very fine sandpaper (400), if, on the other hand, you have messed with the stick, you must first sand with a coarse sandpaper (200) and then pass the thinner one. .

Do not use abrasive papers that are too coarse because the putty, even when hardened, is easy to remove as it is not painted. To restore a homogeneous surface, you can varnish with a stain (natural or colored) or make a pass with natural wax for the wood.

Video: How to Dry Wood Without Cracking (May 2022).